6 AXIS Hexapod Platform with Universal Joint on both ends for Entertaining Simulator
Description
6DOF motion system platform with rotatory joints on both ends made by UNI tech. It is necessary to build a 6 axis motion platform for professional or amateur drivers. Also, the platform are able to generate specified angular. What’s more, it creates high accelerations and velocities. It will create you a more vivid virtual reality experience.
With full power of inverse kinematics,it is possible to move top frame rotation point in 6dof motion platform. Besides, it can easily simulate under-steer or over-still as addition to basic turning and wheel spinning effects.
Technical Date
| Product | UNI-6DOF | |
| Pitch/Screw Lead(mm) | 5 | 10 |
| Payload(KG) | 500 | 250 |
| Max Stroke(mm) | 2000 | 2000 |
| Max Speed(mm/s) | 333 | 500 |
| Roll/Pitch/Yaw(Cont.) | ±35° | ±35° |
| Acceleration | 2g | 2g |
| Precision | ±0.1° | ±0.1° |
| Servo motor rated power (W) | 400W | with AASD-15A drive; with encoder and cable |
| Servo motor voltage | 220V AC | Single Phase |
6DOF platform motion simulator is customized specification, stroke, speed and load.
Lead time: 15 days.
Installation: Universal joints on both ends.(more than 35 degree rotation)
Reduction ratio: 1: 1 Linear (without reduction ratio)
Internal freely-rotated mechanism
Electric Servo cylinder weight 7 (kg)
Dimension
FAQ
Q1. How much payload do I need for UNI 6DOF motion system platform?
A1: Well, that’s depends on your requirements. Just remember, single load of actuator value aren’t payload divided by six. This can be easily understandable. If platform tilts to one side, then the gravity center are uneven. Single load of actutor are not able to suppot heavy payload. It will reduce the lift of ball screw. Also, cockpit, monitor weight need to be taken into consideration.
Q2. What is the max velocity and acceleration you can make?
A2: Normal case are for 250mm/s or 500mm/s. 1000mm/s are also workable for small payload. And acceleration for 2g.
Q3. Can you provide a control system to compatible with X-plane or Simtools?
A2: Yes, our controller can compatible with many softwares. Real engine, unity are included as well.
